Ongoing OCD

Electric motor control modules

3PHACDMM

3PHBLDCDMM

BDCDMM

A series of third-generation motor control modules based on M32 intelligent inverters and control controllers. The modules are designed to control PMSM, BLDC motors with position sensors and without sensors, as well as to control commutator and asynchronous motors, including those with a vector algorithm.

Control can be performed via the RS-485 interface.

On request

Development

IV q.

2026 yr.

Drive control unit

DCU-200-1-A

The converter is a block-type frequency converter controlled by a user interface, with power circuits for connecting an electric motor at the output, and implementing motor control in the traction drive according to the specified commands.

The design, parameter, and functional prototype of the unit is the Curtis 1236E-54xx.

On request

Development

IV q.

2026 yr.

Thyristor power regulator

M28

Three-phase thyristor power controllers designed to operate in AC networks with voltages ranging from 100 to 400 V and loads up to 60 kW.

The modules support all standard control types and can operate in PID controller mode. Control can be performed via the RS-485 interface.

On request

 Development

IV q.

2026 yr.

Thyristor soft-start device

Thyristor soft starter designed to work with asynchronous electric motors with voltage from 100 to 400 V and a power of up to 22 kW. Modules provide start and stop on a customizable ramp, provide work with limit switches and bypass.

​Control can be carried out via the RS-485 interface.

IV q.

2026 yr.

A DC transistor module that functions as a relay, a protection switch, and an intelligent key (switching frequency up to 20 kHz) with a customizable current-time characteristic for current protection. The module is designed to switch DC currents up to 400 A at a DC voltage of up to 650 V.

It can be controlled via the RS-485 interface.

IV q.

2026 yr.

DM2100P-B

DR2100P-B

IV q.

2026 yr.